AMS Carbon Fiber Air Intake | 2020-2021 Toyota GR Supra 3.0L

Toyota GR Supra 3.0L Carbon Fiber Air Intake System by AMS Performance

The AMS Performance Toyota GR Supra Carbon Fiber Air Intake kit was designed to draw a higher volume of cold air into the stock turbocharger. With this intake installed, the factory plastic filter box and plastic intake tube are replaced with our motorsport grade matte carbon fiber components and dry media air filter. The MKV Supra Carbon Fiber Air Intake Kit is a vast improvement over the stock intake system and in our extensive SnailWorks© Engineering Team R&D testing has shown a massive 25% increase in airflow efficiency!

You can expect an easy install without cutting, trimming or taking off any additional components. It can be installed with basic hand tools in minutes! Couple that with a purpose built, reusable synthetic high-flow dry media filter, you’ll no longer have to purchase cheap factory paper filters down the road. The “Dry Media” filter means just that, no more messy oiling of your filter. The washable MKV Supra synthetic media filter was designed and manufactured specifically to fit this high performance automotive application, and the filter size and configuration was fine tuned to ensure that it will still provide all the necessary air for any MKV Supra, including upgraded turbo cars, without any substantial restriction or compromise in filter efficiency.

The new large AMS airbox was specifically designed to distribute airflow evenly over the entire circumference of the intake filter by allowing air to swirl around it. This means greater distribution of cold airflow across the filter resulting in lower pressure drop and a longer filter life between cleanings.The AMS Performance MKV Supra Carbon Fiber Intake Kit is engineered to deliver a 25% reduction in pressure drop which leads to better efficiency and more power. Because the Supra uses a torque based ECU tuning strategy, our SnailWorks© Engineering Team has found that horsepower is not significantly changed with any aftermarket engine components unless proper ECU calibration is made to take advantage of the new hardware components.

Features

• Enclosed Intake Completely Seals Out Hot Engine Bay Air
• Motorsports Grade, Hand Laid Carbon Fiber
• Durable Billet Aluminum Mounting Hardware
• No Yellowing or Fading Over Time
• Dry Media Filter means Easy Cleaning and NO Oil

Benefits

• 25% Reduction in Airflow Restriction (Pressure Drop)
• Draws a Higher Volume of Cold Air
• Even Distribution of Cold Air Across Filter

Please Note: Will not fit 2021 model year with factory strut tower bracing unless additional spacers are used

Applications

• 2020 Toyota GR Supra 3.0L
• 2021 Toyota GR Supra 3.0L (*Does not fit with factory strut tower bracing unless additional spacers are used*)

What's In The Box?

• 1 - Motorsport Grade Matte Carbon Fiber Sealed Airbox
• 1 - Motorsport Grade Matte Carbon Fiber Intake Tube
• 1 - Rubber Grommet Airbox Seal
• 1 - Dry Media Filter
• Billet Aluminum Brackets and Stanchions
• All Necessary Mounting Hardware

References

• Installation Instructions

Warranty

• Manufacturer Standard Warranty