1 2

Kthnxbye Racing

K&N Performance Air Intake System | 2000-2009 Honda S2000

K&N Performance Air Intake System | 2000-2009 Honda S2000

$379.99
$379.99
Sale Sold out
Shipping calculated at checkout.


K&N Fipk Air Intake Kit Honda S2000  00-07

Fuel Injection Performance Air Intake Kit 

2000-2007 Models. AP1 & AP2

The Fuel Injection Performance Kit (FIPK) was designed to promote performance in fuel injected stock engines by creating air filtration with the least resistance in air flow. The benefit of low resistance air filters can be felt directly in throttle response. In addition to the filter, these kits have uniquely designed adapters. These adapters create a radius entry which reduces restriction and allows the engine to ingest an even greater volume of air. To design such an assembly, two factors must be considered: the air filtering element and the air filter adapter. The FIPK combines a precision high-flow K&N air filter element with other necessary components, depending on the specific application.

Filters Air More Effectively Than A Stock Paper Element!

Allows More Air into Engine!

Easy Bolt-On Installation!

Million Mile Limited Warranty!

HP & Torque: 7-8 HP/10 lb ft Torque

Installation: Designed to Replace the Restrictive Factory Air Filter Housing. This is a BOLT-ON Kit. Installation Normally Takes 20-30 Minutes and Includes All the Necessary Hardware. Only Regular Hand Tools Required. Comes With Complete Instructions.

Tech Notes: Filter is cleaned by first brushing off any large embedded dirt. Then spray on the K&N cleaner and let it soak for 10 minutes. Next, Rinse off the element with LOW pressure water. (Always flush from the clean side to the dirty side.) Then allow filter to dry NATURALLY. After filter has dried re-oil with K&N air filter oil only. Apply evenly to entire filter making sure to oil down into each pleat. Then re-install making sure the element seats properly in the filter case.

50 States Smog Legal

2000-2009 Honda S2000 Performance Air Intake System by K&N

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Features

  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Replaces factory air filter and intake tube
  • Lower Weight than Bulky Stock Intake System

Benefits

  • Guaranteed to increase horsepower and torque
  • Engineered to provide high airflow and exceptional filtration
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
View full details